FELLA 3-POINT CONVENTIONAL
GEAR DRIVE DISC MOWERS

FOR A GOOD MOWING EXPERIENCE

Image
Model No. SM 208

Working Width: 6ft 8 in
Output approx. acres per hour: 6 acres
H. P. required: 40 hp
PTO rotation: 540 rpm
Approximate weight: 895 lbs

Model No. SM 248

Working Width: 7 ft 10 in
Output approx. acres per hour: 6.5 acres
H. P. required: 50 hp
PTO rotation: 540 rpm
Approximate weight: 960 lbs

These models have been working on
American farms since the 1990’s.

Image

FELLA SM208 and SM248

Image
  • Heavy curtains fold-up front and rear for easy access to cutter bar.

  • Special crop divider combined with strong curtain forces heavy crops down to drum knives for clean cut at end of cutter bar.

  • Rolling swath disc receives the crop and creates clean area for next cut—eliminates blockages. FELLA SM208 and SM248

  • V belt drive with automatic tensioner.
No guessing about proper belt tension.

  • Balance spring to assure proper weight of cutter bar on the ground.

  • Breakaway latch to protect mower when hitting immovable objects.

A look into the workings of the cutter bar

  • Very low risk of wear.

  • Easy to repair; bolted-on cutter bar with all components mounted in the base plate and bolted-on cover plate

  • Equipped for every type of load due to generously dimensioned, robust, polished drive gear sprockets made of high quality steel.
Image

Solid mounting in bearings—high level of reliability when in use.

  • FELLA-quality blades for an extremely high quality of cut—only if engraved with the FELLA lettering!
  • High-quality roller bearings for ensuring centrical running of the gear wheels
  • Reliable sealing of the complete cutter bar
  • Roll/shear pin in the bearing flange of each mower disc-cutter bar protection if an obstruction is encountered when working

FEATURES OF THE FELLA GEAR DRIVE DISC MOWERS

SM208 and SM248

Image

Robust frame.
Outer support is standard on FELLA SM248 Gear Drive Disc Mowers.
Modern rotating swath board and divider are ideal for heavy crops.

All-around, sound absorbing, easy-access folding guards.

  • Foldable protection cloth provides optimum access, easy maintenance and exchange of blades.

  • Hydraulic device provides upward swiveling to change from transport to working position from driver seat.

  • Stone protector and large, hardened skid are standard affording long working life.

  • Precision-guided blades with screwed-on supporting bolts provide maximum safety.

  • Standard mounted-spring discharge provides low ground pressure and protects sod

3-POINT CONVENTIONAL FELLA DISC MOWERS

Image

Slope Mowing with the FELLA Mowers

Cutter bar breathing tube overhead and to outside end of cutter bar allows slope mowing with Fella disc mowers.
Possible to mow slopes to 30 degrees without damage to bearings, etc.

Back to top